Roofing with tiles begins after the roofing has been completed and all elements passing through the roof surface, such as chimneys, ventilation ducts, etc., have been removed. When laying tiles, the following rules must be observed:work with tiles with sealing seams should be carried out at daytime temperatures above 5 ° C,
the tile is attached to the base. The method of their installation depends on the type of shingles, as well as the slope of the roof slope and the climatic zone,
the first row of shingles should be laid on a cornice board, the subsequent layers are laid in such a way that the lower part of the higher shingles presses the upper parts of the lower ones.
Roof tiles monk-nun
The monk-nun tile is laid directly on the crate in such a way that separate rows form vertical gutters. The joints of the neighboring nuns are covered with nuns mounted on recesses that create the right wave. The joints of the nuns should form perpendicular lines and be parallel to each other. Any deviations should not exceed 20 mm along the entire length of the belt. When placing the nuns, keep an appropriate distance so that one monk covers two nuns. The nuns are placed on hooks by two neighboring nuns, and then attached with wire to nails driven into the slats.Carp fishing rods are individually covered
Tile laying begins at the cornice and ends at the ridge with a double layer of tiles. Each subsequent row of tiles must overlap the bottom layer by at least 15 cm. You should also remember to keep the offset relative to the lower layers, which is half the width of the tile.
Roof covering with a separate plain tile is not recommended in buildings with an attic, since such a solution does not provide sufficient tightness.Double coating with a carp rod
With double wiring with a carp rod, two types of coating are distinguished: lace and scaly. When choosing lace, two layers of tiles are laid on each crate (the distance between the crates is from 25 to 28 cm). The lower layer of tiles is laid by clinging it to the crate with system hooks. The tiles of the upper layer are laid with latches on the upper edges of the tiles of the lower layer. Tiles should be laid, not forgetting to shift each layer by half the width of the tile. Rows of tiles laid twice parallel to the cornice should overlap the tiles of the lower row by a length of 12 to 15 cm. Regardless of the coating method and the required tightness, the tiles can be laid dry or on a mortar. In both the first and second cases, the tile joints parallel to the cornice should be glued with lime mortar. Players at Bons Casino can take advantage of several exclusive bonuses that cater specifically to their preferences. Check out the latest offers at https://casino-bons.in/bonus .